Component Inspection

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK KEY SWITCH
1. Turn ignition switch OFF.
2. Disconnect key switch connector.
3. Check continuity between key switch terminals 1 and 2.
  1 - 2
  
  When key is inserted into key cylinder: Continuity should exist.
  
  When key is removed from key cylinder: Continuity should not exist.
  
  Fig 1: Checking Key Switch
  Courtesy of NISSAN NORTH AMERICA, INC.
  
  Is the inspection result normal?
  
  YES: Inspection End.
  
  NO: Replace key switch.