LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Audio, Visual, Navigation System (Navigation)) >> DTC/Circuit Diagnosis >> Amp. On Signal Circuit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

  1. CHECK AUDIO AMPLIFIER AMP. ON SIGNAL 
    1. Turn audio system ON.
    2. Check voltage between audio amplifier connector B159 and ground.
      Audio amplifier Ground Voltage (Approx.)
      Connector Terminal
      B159 9 - Greater than 6.5 V

      Is inspection result normal? 

      YES: Inspection End.

      NO: GO TO 2.

  2. CHECK AV CONTROL UNIT AMP. ON SIGNAL 

    Check voltage between AV control unit connector M96 and ground.

    AV control unit Ground Voltage (Approx.)
    Connector Terminal
    M96 1 - Greater than 6.5 V

    Is inspection result normal? 

    YES: Repair or replace harness or connectors.

    NO: Replace AV control unit. Refer to "REMOVAL AND INSTALLATION ".