LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Engine Control System (Introduction)) >> System Description >> System >> Cooling Fan Control >> COOLING FAN CONTROL: System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

WARNING: This page is about a different car, the 2013 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor
Camshaft position sensor
Engine speed(1) Cooling fan control IPDM E/R
โ†“
Cooling fan control module
โ†“
Cooling fan motor
Engine coolant temperature sensor Engine coolant temperature
Refrigerant pressure sensor Refrigerant pressure
Battery Battery voltage(1)
Combination meter Vehicle speed(2)
A/C auto amp. A/C ON signal(2)
A/C evaporator temperature(2)
Target A/C evaporator temperature(2)
Blower ON signal
(1) The ECM determines the start signal status by the signals of engine speed and battery voltage.
(2) This signal is sent to ECM via the CAN communication line.