Work Procedure
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit: GO TO 2.
To write vehicle specification into the AV control unit by hand: GO TO 3.
- WRITE STORED DATA
CONSULT Configuration
Select "After Replace ECU" in "Read/Write Configuration." Write data stored in CONSULT with the "Before Replace ECU" function into the AV control unit.
: GO TO 4.
- MANUALLY WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Manual Configuration." Refer to the CONFIGURATION LIST to write vehicle specification into the AV control unit. Refer to "CONFIGURATION LIST ".
: GO TO 4.
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
: WORK END