Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM THE SELF-DIAGNOSIS
1. Turn the ignition switch ON.
2. Turn the MAIN switch of ICC system ON, and then wait for 30 seconds or more.
3. Perform "All DTC Reading" with CONSULT.
4. Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".
  Is "U1000" detected as the current malfunction?
  
  YES: Refer to "TROUBLE DIAGNOSIS FLOW CHART ".
  
  NO: Refer to "INTERMITTENT INCIDENT ".