Work Procedure (Pattern 1)

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

4WAS FRONT ACTUATOR ADJUSTMENT
With CONSULT
1. Start the engine.
  CAUTION: Never drive the vehicle.
2. Turn the steering wheel to adjust "ACTR ROTA ANG" of the 4WAS front control unit "DATA MONITOR" so that it falls within the range shown below:
  ACTR ROTA ANG: (-3.5) - (+3.5) deg
3. Turn the ignition switch OFF.
  CAUTION: Never touch the steering wheel after turning ignition switch OFF.
  
  : END