LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Steering Control System (With 4WAS)) >> DTC/Circuit Diagnosis >> DTC C1684, C1685: 4WAS Main Control Unit Communication >> Component Inspection (Yaw Rate/Side/Decel G Sensor)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (Yaw Rate/Side/Decel G Sensor)

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK YAW RATE/SIDE/DECEL G SENSOR 
    1. Turn the ignition switch OFF.
    2. Remove yaw rate/side/decel G sensor. Refer to "REMOVAL AND INSTALLATION ".
    3. Check the resistance between yaw rate/side/decel G sensor connector terminals.
      Yaw rate/side/decel G sensor Resistance (Approx.)
      Terminal
      2 - 3 120 Ω

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace yaw rate/side/decel G sensor. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals