LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Steering Control System (With 4WAS)) >> DTC/Circuit Diagnosis >> DTC C1684, C1685: 4WAS Main Control Unit Communication >> Component Inspection [ABS Actuator and Electric Unit (Control Unit)]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection [ABS Actuator and Electric Unit (Control Unit)]

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) 
    1. Turn the ignition switch OFF.
    2. Remove ABS actuator and electric unit (control unit). Refer to "REMOVAL AND INSTALLATION ".
    3. Check the resistance between ABS actuator and electric unit (control unit) connector terminals.
      ABS actuator and electric unit (control unit) Resistance (Approx.)
      Terminal
      16 - 6 120 Ω

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace ABS actuator and electric unit (control unit). Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals