Removal and Installation: Removal
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Never erase the memory (history) of self-diagnosis results when replacing 4WAS front control unit after diagnosis.
- Erase the memory of the self-diagnosis results (record) after printing out or recording all the values of "DATA MONITOR".
- Turn the ignition switch OFF.
- Remove the glove box. Refer to "REMOVAL AND INSTALLATION ".
- Remove the instrument lower panel RH. Refer to "REMOVAL AND INSTALLATION ".
- Disconnect 4WAS front control unit connectors.CAUTION: Disconnect 4WAS front control unit connectors 10 minutes after turning the ignition switch OFF.
- Remove the bolts of 4WAS front control unit.
- Remove the 4WAS front control unit.