Can Diagnostic Support Monitor
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- The communication status and the number of errors of 4WAS main control unit, ECM, ABS actuator and electric unit (control unit), 4WAS front control unit and the steering angle sensor are indicated.
- Error counter displays OK if any malfunction is not detected in the past. If the malfunction is detected, it displays 0. The upper limit of the counters is 39.
| Item | PRSNT | PAST |
|---|---|---|
| TRANSMIT DIAG | OK/UNKWN | OK/0 - 39 |
| ECM | OK/UNKWN | OK/0 - 39 |
| VDC/TCS/ABS | OK/UNKWN | OK/0 - 39 |
| STRG | OK/UNKWN | OK/0 - 39 |
| 4WAS | OK/UNKWN | OK/0 - 39 |
DISPLAYED RESULT (PRSNT)
- OK: It is normal.
- UNKWN: CONSULT cannot receive (transmit) the data transmitted (received) by the diagnosed unit normally.
DISPLAYED RESULT (PAST)
- OK: It is normal.
- When "0" is displayed: It indicates that the system is presently malfunctioning.
- When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.NOTE: Each time when ignition switch is turned OFF to ON, numerical number increases in 1→2→3...38→39. When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis is erased.