Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HIGH PRESSURE FUEL PUMP SOLENOID

Turn ignition switch OFF.
Disconnect high pressure fuel pump harness connector.

Check the resistance between high pressure fuel pump connector terminals as per the following.

RESISTANCE SPECIFICATION

+	-	Condition		Resistance
High pressure fuel pump
Terminal
1	2	Temperature	20 - 30°C (68 - 86°F)	9 - 11 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace high pressure fuel pump. Refer to "REMOVAL AND INSTALLATION ".