DTC Detection Logic
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC
| DTC | Trouble diagnosis name | DTC detecting condition | Possible cause |
|---|---|---|---|
| C1A50 | ADAS MALFUNCTION | If ADAS control unit is malfunctioning | ADAS control unit |
NOTE:
If DTC "C1A50" is detected along with DTC "U1000", first diagnose the DTC "U1000". Refer to
"ADAS CONTROL UNIT : DTC LOGIC ".
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine.
- Turn the LDP system ON.
- Perform "All DTC Reading" with CONSULT-III.
- Check if the "C1A50" is detected as the current malfunction in "Self Diagnostic Result" of "LANE CAMERA".
Is "C1A50" detected as the current malfunction?
YES: Refer to "DIAGNOSIS PROCEDURE ".
NO: Refer to "INTERMITTENT INCIDENT ".