Component Function Check
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WARNING SYSTEMS SWITCH INPUT SIGNAL
- Turn the ignition switch ON.
- Select the DATA MONITOR item "WARN SYS SW" of "ICC/ADAS" with CONSULT-III.
- With operating the warning systems switch, check the monitor status.MONITOR ITEM DESCRIPTION
Monitor item Condition Monitor status WARN SYS SW Warning systems switch is pressed On Warning systems switch is not pressed OFF Is the inspection result normal?
YES: Warning systems switch circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".