Physical Values
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS REFERENCE
| Terminal No. (Wire color) |
Description | Condition | Value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (V/W) | Ground | Warning systems switch | Input | Ignition switch ON | When warning systems switch is not pressed | 12 V |
| When warning systems switch is pressed | 0 V | |||||
| 3 (R/Y) | A.B.A. OFF switch | Input | Ignition switch ON | When A.B.A. OFF switch is not pressed | 12 V | |
| When A.B.A. OFF switch is pressed | 0 V | |||||
| 4 (LG/B) | Warning systems ON indicator | Output | Ignition switch ON | Warning systems ON indicator ON | 0 V | |
| Warning systems ON indicator OFF | 12 V | |||||
| 5 (R) | ICC brake hold relay drive signal | Output | Ignition switch ON | - | 12 V | |
| At "STOP LAMP" test of "Active test" | 0 V | |||||
| 6 (B) | Ground | - | Ignition switch ON | - | 0 V | |
| 7 (L) | ITS communication-H | - | - | - | - | |
| 8 (Y) | ITS communication-L | - | - | - | - | |
| 12 (G/R) | Warning buzzer signal | Output | Ignition switch ON | Warning buzzer operation | 0 V | |
| Warning buzzer not operating | 12 V | |||||
| 14 (L) | CAN-H | - | - | - | - | |
| 15 (P) | CAN-L | - | - | - | - | |
| 16 (W/G) | Ignition power supply | Input | Ignition switch ON | Battery Voltage | ||