Method Of Starting

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Start condition of on board self-diagnosis

ICC system OFF
DCA system OFF
Vehicle speed 0 km/h (0 MPH)

Turn the ignition switch OFF.
Start the engine.
Wait for 5 seconds after starting the engine. Push up the RESUME/ACCELERATE switch 5 times and push down the SET/COAST switch 5 times within 10 seconds.
NOTE: If the above operation cannot be performed within 10 seconds after waiting for 5 seconds after starting the engine, repeat the procedure from step 1.

Fig 1: Start Engine Timing Chart
Courtesy of NISSAN MOTOR CO., U.S.A.
The DTC is displayed on the set vehicle speed indicator (1) on the ICC system display on the information display when the on board self-diagnosis starts. Refer to "DTC INDEX ".

Fig 2: Vehicle Speed Indicator Timing Chart
Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE:
- It displays for up to 5 minutes and then stops.
- If multiple malfunctions exist, up to 6 DTCs can be stored in memory at the most, and the most recent one is displayed first.