ADAS CONTROL UNIT : DTC Logic
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC
DTC DETECTION LOGIC
| DTC (On board display) | Trouble diagnosis name | DTC detecting condition | Possible causes |
|---|---|---|---|
| C1A00 (0) | CONTROL UNIT | ADAS control unit internal malfunction | ADAS control unit |
DTC CONFIRMATION PROCEDURE
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine.
- Perform "All DTC Reading" with CONSULT-III.
- Check if the "C1A00" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".
Is "C1A00" detected as the current malfunction?
YES: Refer to "ADAS CONTROL UNIT : DIAGNOSIS PROCEDURE ".
NO: INSPECTION END