CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE FUNCTION : Menu

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Displayed by Pressing Each Switch

ICC SYSTEM DISPLAY (ON THE INFORMATION DISPLAY)

Fig 1: Screen Display - Cruise

Courtesy of NISSAN MOTOR CO., U.S.A.

SWITCH DESCRIPTION

No.	Description	Function
1	ICC system warning lamp	Indicates that a malfunction occurs in the ICC system
2	SET switch indicator	Indicates that the set conventional (fixed speed) cruise control mode is controlled
3	MAIN switch indicator	Indicates that the MAIN switch is ON (ICC system ON)

SYSTEM CONTROL CONDITION DISPLAY

Push and hold the ICC MAIN switch for longer than approximately 1.5 seconds. This mode will be in a standby state for setting.

ICC SYSTEM DISPLAY CONDITION

Condition	Display on ICC system display
Standby mode	Courtesy of NISSAN MOTOR CO., U.S.A.
Control mode	Courtesy of NISSAN MOTOR CO., U.S.A.

WARNING AND AUTOMATIC CANCELLATION DISPLAY

ICC SYSTEM DISPLAY DESCRIPTION

Condition		Description	Display on ICC system display
Warning display	When the ICC system is malfunctioning	A chime sounds and the control is automatically canceled. NOTE: Turn the engine OFF and restart engine. If there is no malfunction, it is possible to set the system	Courtesy of NISSAN MOTOR CO., U.S.A.
System cancel display	When brake pedal is depressed When pressing CANCEL switch When the vehicle speed falls below approximately 32 km/h (20 MPH) When the vehicle slows down more than 13 km/h (8 MPH) below the set speed When the selector lever is not in the "D" position or manual mode When the parking brakes are applied When VDC (including the TCS) operates When a wheel slips	A chime sounds and the control is automatically canceled NOTE: The system will be in a standby, after the control is automatically canceled A chime sounds when the control is automatically canceled, except when brake pedal is depressed or when CANCEL switch is pressed	Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: When the ICC system is automatically canceled, the cancellation condition can be displayed on "WORK SUPPORT" of CONSULT-III (ICC/ADAS).