Data Monitor
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
Display Item List
DISPLAY ITEM LIST
| X: Applicable | ||||
|---|---|---|---|---|
| Display item [Unit] | MAIN SIGNALS | Description | ||
| SPEED METER [km/h] | X | Value of vehicle speed signal received from ABS actuator and electric unit (control unit) via CAN communication.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
||
| SPEED OUTPUT [km/h] | X | Vehicle speed signal value transmitted to other units via CAN communication.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
||
| ODO OUTPUT [km/h or mph] | Odometer signal value transmitted to other units via CAN communication. | |||
| TACHO METER [RPM] | X | Value of the engine speed signal received from ECM via CAN communication.
NOTE:
8191.875 is displayed when the malfunction signal is received.
|
||
| FUEL METER [L] | X | Fuel level indicated on combination meter. | ||
| W TEMP METER [°C] | X | Value of engine coolant temperature signal is received from ECM via CAN communication.
NOTE:
215 is displayed when the malfunction signal is input.
|
||
| ABS W/L [On/Off] | Status of ABS warning lamp detected from ABS warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |||
| VDC/TCS IND [On/Off] | Status of VDC OFF indicator lamp detected from VDC OFF indicator lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |||
| SLIP IND [On/Off] | Status of VDC warning lamp detected from VDC warning lamp signal received from ABS actuator and electric unit (control unit) via CAN communication. | |||
| BRAKE W/L [On/Off] | Status of brake warning lamp detected from brake warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication.
NOTE:
Displays "Off" if the brake warning lamp is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.
|
|||
| DOOR W/L [On/Off] | Status of door open warning detected from door switch signal received from BCM via CAN communication. | |||
| HI-BEAM IND [On/Off] | Status of high beam indicator lamp detected from high beam request signal is received from BCM via CAN communication. | |||
| TURN IND [On/Off] | Status of turn indicator lamp detected from turn indicator signal is received from BCM via CAN communication. | |||
| FR FOG IND [Off] | This item is displayed, but cannot be monitored. | |||
| RR FOG IND [Off] | This item is displayed, but cannot be monitored. | |||
| LIGHT IND [On/Off] | Status of light indicator lamp detected from position light request signal is received from BCM via CAN communication. | |||
| OIL W/L [On/Off] | Status of oil pressure warning lamp detected from oil pressure switch signal is received from BCM via CAN communication. | |||
| MIL [On/Off] | Status of malfunction indicator lamp detected from malfunctioning indicator lamp signal is received from ECM via CAN communication. | |||
| GLOW IND [Off] | This item is displayed, but cannot be monitored. | |||
| CRUISE IND [On/Off] |
|
|||
| SET IND [On/Off] | Status of SET indicator detected from meter display signal is received from ADAS control unit via CAN communication. | |||
| CRUISE W/L [On/Off] | Status of CRUISE warning lamp judged from ICC warning lamp signal received from ADAS control unit with CAN communication line. | |||
| BA W/L [On/Off] | Status of IBA OFF indicator lamp judged from IBA OFF indicator lamp signal received from ADAS control unit with CAN communication line. | |||
| ATC/T-AMT W/L [On/Off] | Status of A/T CHECK warning lamp judged from A/T CHECK indicator lamp signal received from TCM with CAN communication line. | |||
| ATF TEMP W/L [Off] | This item is displayed, but cannot be monitored. | |||
| 4WD W/L [On/Off] | Status of 4WD warning lamp judged from 4WD warning lamp signal received from 4WD control unit with CAN communication line. | |||
| FUEL W/L [On/Off] | Low-fuel warning lamp status detected by the identified fuel level. | |||
| WASHER W/L [On/Off] | Status of low washer fluid warning judged from washer level switch input to combination meter. | |||
| AIR PRES W/L [On/Off] | Status of low tire pressure warning lamp judged from low tire pressure warning lamp signal received from BCM with CAN communication line. | |||
| KEY G/Y W/L [On/Off] | Status of KEY warning lamp (Green/Yellow) detected from KEY warning lamp signal is received from BCM via CAN communication. | |||
| KEY KNOB W/L [Off] | This item is displayed, but cannot be monitored. | |||
| AFS OFF IND [On/Off] | Status of AFS OFF indicator lamp judged from AFS OFF indicator lamp signal received from AFS control unit with CAN communication line. | |||
| DDS(1) W/L [Off] | This item is displayed, but cannot be monitored. | |||
| LANE W/L [On/Off] | Status of lane departure warning lamp judged from lane departure warning lamp signal received from ADAS control unit with CAN communication line. | |||
| LDP IND [On/Off] | Status of LDP ON indicator lamp judged from LDP ON indicator lamp signal received from ADAS control unit with CAN communication line. | |||
| ATP W/L [On/Off] | Status of ATP warning lamp judged from ATP warning lamp signal received from 4WD control unit with CAN communication line. | |||
| DCA IND [Off] | This item is displayed, but cannot be monitored. | |||
| CHECK SUS IND [On/Off] | Status of CK SUSP indicator lamp judged from CK SUSP indicator lamp signal received from E-SUS control unit with CAN communication line. | |||
| LCD [B&P N, B&P I, ID NG, ROTAT, SFT P, INSRT, BATT, NO KY, OUTKY, LK WN] | Displays status of Intelligent Key system warning judged from meter display signal received from BCM with CAN communication line. | |||
| ACC TARGET [On/Off] | Status of vehicle ahead detection indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |||
| ACC DISTANCE [Off, Short, Middle, Long] | Status of set distance indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |||
| ACC OWN VHL [On/Off] | Status of own vehicle indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |||
| ACC SET SPEED [Off, km/h] | Status of set vehicle speed indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |||
| ACC UNIT [On/Off] | Status of display unit judged from meter display signal received from ADAS control unit with CAN communication line. | |||
| SHIFT IND [P, R, N, D, M1, M2, M3, M4, M5, M6, M7] | Status of shift position indicator judged from shift position signal and manual mode indicator signal received from TCM with CAN communication line. | |||
| 4WD IND [AUTO, LOCK, 2W, 4Lo, HL1, HL2, MALF] | Status of 4WD indicator judged from 4WD indicator signal received from 4WD control unit with CAN communication line. | |||
| BSW IND [Off] | This item is displayed, but cannot be monitored. | |||
| BSW W/L [On/Off] | Status of BSW warning lamp (orange) judged from BSW warning lamp signal received from ADAS control unit with CAN communication line. | |||
| AT S MODE SW [On/Off] | Status of snow mode switch. | |||
| M RANGE SW [On/Off] | Status of manual mode switch. | |||
| NM RANGE SW [On/Off] | Status of non-manual mode switch. | |||
| AT SFT UP SW [On/Off] | Status of manual mode shift up switch. | |||
| AT SFT DWN SW [On/Off] | Status of manual mode shift down switch. | |||
| PKB SW [On/Off] | Status of parking brake switch. | |||
| BUCKLE SW [On/Off] | Status of seat belt buckle switch (driver side). | |||
| BRAKE OIL SW [On/Off] | Status of brake fluid level switch. | |||
| A/C AMP CONN [Off] | This item is displayed, but cannot be monitored. | |||
| ENTER SW [On/Off] | Status of □ (ENTER) switch. | |||
| SELECT SW [On/Off] | Status of • (SELECT) switch. | |||
| DISTANCE [km] | Value of distance to empty calculated by combination meter. | |||
| OUTSIDE TEMP [°C or °F] | Ambient temperature value converted from ambient sensor signal received from ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information display. (Because the information display value is a corrected value from the ambient sensor input value.)
|
|||
| FUEL LOW SIG [On/Off] | Status of fuel level low warning signal to output to AV control unit via CAN communication. | |||
| TOW MODE IND [On/Off] | Status of TOW mode indicator lamp judged from TOW mode indicator lamp signal received from TCM with CAN communication line. | |||
| BUZZER [On/Off] | X | Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter. | ||
|
||||
NOTE:
Some items are not available according to vehicle specification.