Detail Flow
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
CONTROL UNIT - SEAT
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Power seat switch (sliding, lifting, reclining) | - | The power seat switch signal is inputted to the driver seat control unit when the power seat switch is operated. |
| 2 | - | Motors (sliding, lifting, reclining) | The driver seat control unit outputs signals to each motor according to the power seat switch input signal. |
NOTE:
The power seat can be operated manually regardless of the ignition switch position.
CONTROL UNIT - TILT & TELESCOPIC
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Tilt & telescopic switch | - | The tilt & telescopic switch signal is inputted to the automatic drive positioner control unit when the tilt & telescopic switch is operated. |
| 2 | - | Motors (Tilt, telescopic) | The automatic drive positioner control unit actuates each motor according to the operation of the tilt & telescopic switch. |
CONTROL UNIT - DOOR MIRROR
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Door mirror remote control switch | - | The door mirror remote control switch signal is inputted to the automatic drive positioner control unit when the door mirror remote control switch is operated. |
| 2 | - | Motors (Door mirror motor) | The automatic drive positioner control unit actuates each motor according to the operation of the door mirror remote control switch. |
NOTE:
The door mirrors can be operated manually when ignition switch is in either ACC or ON position.