Diagnosis Procedure3
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect front display unit connector and around view monitor control unit connector.
- Check continuity between front display unit harness connector and around view monitor control unit harness connector.
Front display unit Around view monitor control unit Continuity Connector Terminal Connector Terminal M215 8 M48 27 Existed - Check continuity between front display unit harness connector and ground.
Front display unit Ground Continuity Connector Terminal M215 8 Not existed Is inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK CAMERA IMAGE SIGNAL
- Connect front display unit connector and around view monitor control unit connector.
- Turn ignition switch ON.
- Check signal between front display unit harness connector and ground.
(+) (-) Condition Reference value Front display unit Connector Terminal M215 8 Ground At camera image is displayed. Is inspection result normal?
YES: Replace front display unit. Refer to "REMOVAL AND INSTALLATION ".
NO: Replace around view monitor control unit. Refer to "REMOVAL AND INSTALLATION ".