Initialization Procedure
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHOOSE METHOD
There are two initialization methods.
Which method do you use?
With door switch: Go to 2.
With vehicle speed: Go to 4.
- STEP A-1
Turn ignition switch from ACC to OFF position.
Go to 3.
- STEP A-2
Driver door switch is ON (open) → OFF (close) → ON (open).
END
- STEP B-1
Drive the vehicle at more than 25 km/h (16 MPH).
END