Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "LIFT RR PULSE" in "Data monitor" mode with CONSULT-III.

Check lifting sensor (rear) signal under the following conditions.

MONITOR ITEM CONDITION

Monitor item

Condition

Value

LIFT RR PULSE

Seat lifting (rear)

Operate (up)

Change (increase)⁽¹⁾

Operate (down)

Change (decrease)⁽¹⁾

Release

No change⁽¹⁾

⁽¹⁾	The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".