Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "SLIDE PULSE" in "Data monitor" mode with CONSULT-III.

Check sliding sensor signal under the following conditions.

MONITOR ITEM CONDITION

Monitor item

Condition

Value

SLIDE PULSE

Seat sliding

Operate (forward)

Change (increase)⁽¹⁾

Operate (backward)

Change (decrease)⁽¹⁾

Release

No change⁽¹⁾

⁽¹⁾	The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".