Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "TELESCO SW-FR", "TELESCO SW-RR" in "Data monitor" mode with CONSULT-III.

Check telescopic switch signal under the following conditions.

MONITOR ITEM CONDITION

Monitor item	Condition		Status
TELESCO SW-FR	Telescopic switch (forward)	Operate	ON
TELESCO SW-FR	Telescopic switch (forward)	Release	OFF
TELESCO SW-RR	Telescopic switch (backward)	Operate	ON
TELESCO SW-RR	Telescopic switch (backward)	Release	OFF

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".