AUTOMATIC DRIVE POSITIONER SYSTEM : System Description
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
The system automatically moves the driver seat, steering column and door mirror position by the driver seat control unit and the automatic drive positioner control unit. The driver seat control unit corresponds with the automatic drive positioner control unit by UART communication.
FUNCTION DESCRIPTION
| Function | Description | |
|---|---|---|
| Manual function | The driving position (seat, steering column and door mirror position) can be adjusted by using the power seat switch, tilt & telescopic switch or door mirror remote control switch. | |
| Memory function | The seat, steering column and door mirror move to the stored driving position by pressing seat memory switch (1 or 2). | |
| Entry/Exit assist function | Exit | On exit, the seat moves backward and the steering column moves upward. |
| Entry | On entry, the seat and steering column returns from exiting position to the previous driving position. | |
| Intelligent Key interlock function | Perform memory operation, exiting operation and entry operation by Intelligent Key unlock operation or driver side door request switch unlock operation. | |
NOTE:
The lumbar support system are controlled independently with no link to the automatic drive positioner system. Refer to
"LUMBAR SUPPORT SYSTEM : SYSTEM DESCRIPTION
".
Sleep control
Driver seat control unit equips sleep control for reducing power consumption.
The system switches to sleep control when all of the following conditions are satisfied.
- Ignition switch is OFF (steering lock status).
- All devices of auto driving position system are not operating.
- 45 seconds timer of driver seat control unit is not operating.
- Set switch and memory switch (1 and 2) are OFF.
Wake-up control
Sleep control releases when detecting status change in either of the following item.
- CAN communication
- Power seat switch
- Set switch and seat memory switch (1 and 2)
- Tilt & telescopic switch