Detail Flow
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
DETAIL FLOW DESCRIPTION
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 | Ignition switch | - | Driver seat control unit receives the signals of [ignition switch signal] from BCM via CAN communication. |
| 2 | - | Motors (Sliding, tilt) | Driver side control unit operates the sliding motor when the operating conditions are satisfied and requests the operations of tilt motor to automatic drive positioner control unit via UART communication. The automatic drive positioner operates each motor. |
| 3 | Sensors (Sliding, tilt) | - | Each sensor monitors the operating positions of seat and steering, and then stops the operation of each motor when each part reaches the recorded address. |