LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Security Control System) >> DTC/Circuit Diagnosis >> DTC B2604: Shift Position >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Shift the selector lever to the P position.
    2. Turn ignition switch ON and wait 5 seconds or more.
    3. Shift the selector lever to the N position and wait 5 seconds or more.
    4. Shift the selector lever to any position other than P and N, and wait 5 seconds or more.
    5. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

      Is DTC detected? 

      YES: GO TO "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals