DTC Confirmation Procedure
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.
- Selector lever: In the P position
- Brake pedal: Depressed
- Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES: GO TO "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.