DTC Confirmation Procedure
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine.
- Turn the DCA or LDP or Blind Spot Intervention system ON.
- Perform "All DTC Reading" with CONSULT.
- Check if the "U150F" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".
Is "U150F" detected as the current malfunction?
YES: Refer to "DIAGNOSIS PROCEDURE ".
NO: Refer to "INTERMITTENT INCIDENT ".