CONSULT-III Function and System Application*1
CONSULT-III FUNCTION AND SYSTEM APPLICATIONS
| Diagnostic test mode | Function | ENGINE | TRANSMISSION | AIR BAG | METER/M&A | BCM | AUTO DRIVE POS. | ABS | IPDM E/R | ICC/ADAS | ALL MODE AWD/4WD | 4WAS(FRONT) | 4WAS(MAIN)/RAS/HICAS | AIR PRESSURE MONITOR | MULTI AV | PRECRASH SEAT BELT | AFS (ADAPTIVE LIGHT) | HVAC | SIDE RADAR LH | SIDE RADAR RH | CAN GATEWAY | LASER | LANE CAMERA | ACCELE PEDAL ACT |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Work Support | This mode enables a technician to adjust some devices faster and more accurately. | x | x | - | - | x | x | x | - | x | - | - | - | x | x | - | x | x | x | x | - | x | x | - |
| Self Diagnostic Results | Retrieve DTC from ECU and display diagnostic items. | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x |
| Data Monitor | Monitor the input/output signal of the control unit in real time. | x | x | - | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | x | - | x | x | x |
| CAN Diagnosis | This mode displays a network diagnosis result about CAN by a diagram. | x | x | x | x | x | x | x | x | x | x | - | x | x | x | x | x | x | x | x | x | x | x | x |
| CAN Diagnosis Support Monitor | It monitors the status of CAN communication. | x | x | - | x | x | x | x | x | x | x | x | x | - | x | x | x | x | x | x | x | x | x | x |
| Active Test | Send the drive signal from CONSULT-III to the actuator. The operation check can be performed. | x | - | - | - | x | x | x | x | x | x | x | x | x | - | - | x | x | x | x | - | - | - | x |
| DTC & SRT confirmation | The status of system monitoring tests and the self-diagnosis status/result can be confirmed. | x | x | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| ECU Identification | Display the ECU identification number (part number etc.) of the selected system. | x | x | x | - | x | x | x | x | x | x | x | x | - | x | x | x | x | x | x | x | x | x | x |
| Function Test | This mode can show results of self-diagnosis of ECU with either "OK" or "NG". For engine, more practical tests regarding sensors/switches and/or actuators are available. | x | x | x | - | - | - | x | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Configuration | Function to READ/WRITE vehicle configuration. | - | - | - | - | x | - | - | - | - | - | - | - | - | x | - | - | x | - | - | x | - | - | - |
| Special Function | Other results or histories, etc. that are recorded in ECU are displayed. | - | x | x | x | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| x: Applicable *1: If GST application is equipped, functions in accordance with SAE J1979 and ISO 15031-5 can be used. |
||||||||||||||||||||||||