DTC Confirmation Procedure

CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform "Self Diagnostic Result" mode of "AIR BAG" using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp status. Refer to "ON BOARD DIAGNOSIS FUNCTION ".
  NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
  
  Is malfunctioning part detected?
  
  YES: Refer to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END