DTC Detection Logic
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B261A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC
".
- If DTC B261A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC
".
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B261A |
PUSH-BTN IGN SW |
BCM detects a difference of signal for 1 second or more between the following items:
- Push-button ignition switch signal
- Push-button ignition switch status signal (CAN)
|
- Harness or connectors (Push-button ignition switch circuit is open or shorted.)
- BCM
- IPDM E/R
|