On Board Diagnosis Item

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

Mode			Description
Self Diagnosis			AV control unit diagnosis. Diagnoses the connections across system components, between AV control unit and GPS antenna.
Confirmation/Adjustment	Display Diagnosis		The following check functions are available: color tone check by color bar display and white display, light and shade check by gray scale display and touch panel calibration response check.
	Vehicle Signals		Diagnosis of signals can be performed for vehicle speed, parking brake, lights, ignition, reverse, side view switch and room lamp.
	Speaker Test		The connection of a speaker can be confirmed by test tone.
	Navigation	Steering Angle Adjustment	When there is a difference between the actual turning angle and the vehicle mark turning angle, it can be adjusted.
		Speed Calibration	When there is a difference between the current location mark and the actual location, it can be adjusted.
		XM SAT Subscription Status	The XM NavTraffic subscription status can be checked.
	Error History		The system malfunction and the frequency when occurring in the past are displayed. When the malfunctioning item is selected, the time and place that the selected malfunction last occurred are displayed.
	Synchronizer FES Clock		-
	Vehicle CAN Diagnosis		The transmitting/receiving of CAN communication can be monitored.
	AV COMM Diagnosis		The communication condition of each unit of Multi AV system can be monitored.
	Hands-free Phone		The received volume adjustment of hands-free phone and microphone speaker check can be performed.
	Camera		The signal connected to camera control unit can be checked and the guiding line position that overlaps rear view camera image can be adjusted.
	XM	XM NaviTrffic	Change Channel Any necessary channels required to receive traffic information etc. from the satellite radio system can be set. Change Application ID Any application ID'-s required to receive traffic information etc. from the satellite radio system can be set.
		XM NavWeather
		XM CGS
		Diag
	Delete Unit Connection Log		Erase the connection history of unit and error history.
	Initialize Settings		Initializes the AV control unit memory.
	Version Information		Version information of the AV control unit is displayed.