Component Inspection
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK IGNITION RELAY-1
- Turn ignition switch OFF.
- Remove ignition relay-1.
- Check the continuity between ignition relay-1 terminals.
Terminals Condition Continuity 3 and 5 12 V direct current supply between terminals 1 and 2 Existed No current supply Not existed Courtesy of NISSAN NORTH AMERICA, INC.
Is the inspection result normal?
YES: INSPECTION END
NO: Replace Ignition relay-1.