Front Wiper Control
WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
IPDM E/R detects front wiper stop position by a front wiper auto stop signal.
When a front wiper auto stop signal is in the conditions listed below, IPDM E/R stops power supply to wiper after repeating a front wiper 10 seconds activation and 20 seconds stop five times.
| Ignition switch | Front wiper switch | Auto stop signal |
|---|---|---|
| ON | OFF | Front wiper stop position signal cannot be input 10 seconds. |
| ON | The signal does not change for 10 seconds. |
NOTE:
This operation status can be confirmed on the IPDM E/R "DATA MONITOR" that displays "Block" for the item "WIP PROT" while the wiper is stopped.