Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not remove the relays from the IPDM E/R. Tampering with the relays may cause additional incidents with the vehicle.

Disconnect negative battery terminal. Refer to "REMOVAL AND INSTALLATION ".
Remove IPDM E/R upper cover.

Fig 1: Identifying IPDM E/R Upper Cover
Courtesy of NISSAN NORTH AMERICA, INC.
Release two clips and pull IPDM E/R up from case.
Disconnect the harness connectors from the IPDM E/R and remove.

Fig 2: Locating IPDM E/R Clips
Courtesy of NISSAN NORTH AMERICA, INC.