Data Monitor
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor item (Unit) |
Remarks |
| STOP LAMP SW [On/Off] |
Stop lamp switch signal status via CAN communication line is displayed. |
| ENG SPEED SIG [Run/Stop] |
Engine status is displayed. |
| ETS ACTUATOR [On/Off] |
Operating condition of AWD actuator relay (integrated in AWD control unit) is displayed. |
| 4WD WARN LAMP [On/Off] |
Control status of AWD warning lamp is displayed. |
| 4WD MODE SW [##] |
Mode switch is not equipped, but displayed. |
| 4WD MODE MON [AUTO] |
Control status of AWD is displayed. |
| DIS-TIRE MONI [mm] |
Improper size tire installed condition is displayed. |
| P BRAKE SW [On/Off] |
Parking brake switch signal status via CAN communication line is displayed. |
| BATTERY VOLT [V] |
Power supply voltage for AWD control unit |
| THRTL POS SEN [%] |
Throttle opening status is displayed. |
| ETS SOLENOID [A] |
Monitored value of current at AWD solenoid |
| FR RH SENSOR [km/h] or [mph] |
Wheel speed calculated by front RH wheel sensor signal is displayed. |
| FR LH SENSOR [km/h] or [mph] |
Wheel speed calculated by front LH wheel sensor signal is displayed. |
| RR RH SENSOR [km/h] or [mph] |
Wheel speed calculated by rear RH wheel sensor signal is displayed. |
| RR LH SENSOR [km/h] or [mph] |
Wheel speed calculated by rear LH wheel sensor signal is displayed. |