DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Press push-button ignition switch under the following conditions and wait 1 second or more.
- Selector lever: In the P position
- Brake pedal: Not depressed
- Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: GO TO 2.
- Press push-button ignition switch under the following conditions and wait 1 second or more.
- PERFORM DTC CONFIRMATION PROCEDURE 2
- Turn ignition switch ON.
- Turn ignition switch OFF.
- Press driver side door switch and wait 1 second or more.
- Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END