Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START
1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" mode of "BCM" using CONSULT-III.
3. Touch "ERASE".
4. Perform DTC Confirmation Procedure for DTC B260D. Refer to "DTC LOGIC ".
  Is DTC detected?
  
  YES: GO TO 2.
  
  NO: INSPECTION END
REPLACE STEERING LOCK UNIT
1. Replace steering lock unit.
2. Perform the service procedure for steering lock unit replacement. Refer to the CONSULT-III Operation Instructions NATS-IVIS/NVIS.
  INSPECTION END