Without Consult-III
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine.
- Check fuel rail pressure sensor signal voltage.
VOLTAGE SPECIFICATION
| + |
- |
Condition |
Value (Approx.) |
| Fuel rail pressure sensor |
| Connector |
Terminal |
| F26 |
2 |
Ground |
Engine speed: idle |
0.98 - 1.2 V |
| Engine speed: Revving engine from idle to 4, 000 RPM quickly |
1.1 - 2.9 V |