Work Procedure (Group A)

WARNING: This page is about a different car, the 2011 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Relationship Diagram Between DTC, MIL, Driving Pattern And Permanent DTC Status (Group A)

Courtesy of NISSAN MOTOR CO., U.S.A.

Turn ignition switch OFF and wait at least 10 seconds.
Turn ignition switch ON.
Turn ignition switch OFF and wait at least 10 seconds.
Turn ignition switch ON.
Check permanent DTC. Refer to "DIAGNOSIS DESCRIPTION ".
Perform "DTC CONFIRMATION PROCEDURE" for DTCs which are the same as permanent DTCs stored in ECM.
Turn ignition switch OFF and wait at least 10 seconds.
Turn ignition switch ON.
Turn ignition switch OFF and wait at least 10 seconds.
Turn ignition switch ON.
Check permanent DTC. Refer to "DIAGNOSIS DESCRIPTION ".
Check that the permanent DTCs have been erased.