LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Engine Control System - DTCS P0460 To P1235) >> DTC P0850: PNP Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM COMPONENT FUNCTION CHECK
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector terminals under the following conditions.
      VOLTAGE REFERENCE

      ECM Condition Voltage (V)
      Connector + -
      Terminal Terminal
      M107 109 128 Selector lever P or N Battery voltage
      Except above Approx. 0

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals