On Board Diagnosis Function: Notes

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

The diagnosis function of around view monitor control unit is displayed when selecting "Camera Cont." of Confirmation/Adjustment mode in the multi AV system.

AROUND VIEW MONITOR CONTROL UNIT DIAGNOSIS ITEM

AV control unit Confirmation/Adjustment mode

Function

Camera Cont.

Connection Confirmation

The status of signals input to around view monitor control unit can be checked.

Calibrating Camera Image

Rear Camera

Performs the calibration of rear camera.

Pass-Side Camera

Performs the calibration of side camera RH.

Front Camera

Performs the calibration of front camera.

Dr-Side Camera

Performs the calibration of side camera LH.

Initialize Camera Image Calibration⁽¹⁾

The calibration can be initialized to NISSAN factory shipment condition.

Fine Tuning of Bird's-Eye View

The confirmation and adjustment of the difference between each camera can be performed.
The system changes to the ZOOM function by the operation of shift and the ZOOM ratio of each camera can be changed.

Correct Draw Line of Wide View

Rear-Wide View

The position of rear wide view guideline can be changed.

⁽¹⁾	Never perform other operations for approximately 10 seconds after performing "Initialize Camera Image Calibration".