Component Function Check

CONSULT-III DATA MONITOR

1. Select "WIP AUTO STOP" of IPDM E/R data monitor item.
2. Operate the front wiper.
3. With the front wiper operation, check the monitor status.
   FRONT WIPER OPERATION MONITORING STATUS
   
   

   Monitor item	Condition		Monitor status
   WIP AUTO STOP	Front wiper motor	Stop position	STOP P
   		Except stop position	ACT P

   Is the inspection result normal? 

   YES: Front wiper position signal circuit is normal.

   NO: Refer to "DIAGNOSIS PROCEDURE ".