Component Inspection

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

DRIVE MODE SELECT SWITCH INSPECTION

Turn ignition switch OFF.
Disconnect drive mode select switch connector.

Check continuity between drive mode select switch connector terminal 6 and drive mode select switch connector terminals 1, 2, 3 and 4.

Drive mode select switch		Switch position	Continuity
Terminals		Switch position	Continuity
6	1	SNOW	Exist.
	2	ECO
	3	STANDARD
	4	SPORT

Is the inspection result normal?

YES: Inspection

NO: Replace drive mode select switch