Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUEL INJECTOR

Turn ignition switch OFF.
Disconnect fuel injector harness connector.

Check the resistance between fuel injector terminals as per the following.

RESISTANCE SPECIFICATION

Injector		Condition		Resistance
+	-
Terminal
1	2	Temperature	10 - 60°C (50 - 140°F)	1.44 - 1.73 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace malfunctioning fuel injector. Refer to "REMOVAL AND INSTALLATION ".