LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M56 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Engine Control System - Introduction (For MEXICO)) >> Basic Inspection >> Additional Service When Replacing ECM >> Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS

    Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to "ECM: WORK PROCEDURE ".

    : GO TO 2.

  2. PERFORM VIN REGISTRATION

    Perform VIN registration. Refer to "WORK PROCEDURE ".

    : GO TO 3.

  3. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING

    Perform accelerator pedal released position learning. Refer to "WORK PROCEDURE ".

    : GO TO 4.

  4. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING

    Perform throttle valve closed position learning. Refer to "WORK PROCEDURE ".

    : GO TO 5.

  5. PERFORM IDLE AIR VOLUME LEARNING

    Perform idle air volume learning. Refer to "WORK PROCEDURE ".

    : END

scientia non olet · About LEMON Manuals