LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> QX56 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System >> LDW & LDP >> DTC/Circuit Diagnosis >> C1A50 ADAS Control Unit >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

DTC DETECTION LOGIC

DTC Trouble diagnosis name DTC detecting condition Possible cause
C1A50 ADAS MALFUNCTION If ADAS control unit is malfunctioning ADAS control unit
NOTE: If DTC "C1A50" is detected along with DTC "U1000", first diagnose the DTC "U1000". Refer to "ADAS CONTROL UNIT : DTC LOGIC ".
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Start the engine.
    2. Turn the LDP system ON.
    3. Perform "All DTC Reading" with CONSULT-III.
    4. Check if the "C1A50" is detected as the current malfunction in "Self Diagnostic Result" of "LANE CAMERA".

      Is "C1A50" detected as the current malfunction? 

      YES: Refer to "DIAGNOSIS PROCEDURE ".

      NO: Refer to "INTERMITTENT INCIDENT ".