Component Inspection (FPCM)

CHECK FUEL PUMP CONTROL MODULE (FPCM)

Check the voltage between FPCM terminals under the following conditions.

VOLTAGE SPECIFICATION

FPCM		Condition	Voltage
+	-
Terminal	Terminal
7	6	For 1 second after turning ignition switch ON	Approx. 8.5 V
		More than 1 second after turning ignition switch ON	Approx. 0 V
		Idle speed	Approx. 8.5 V

Is the inspection result normal?

YES: INSPECTION END

NO: Replace FPCM. Refer to "REMOVAL AND INSTALLATION ".