| LDW SW |
[On/Off] |
Switch status judged from warning systems switch signal |
| LDW ON LAMP |
[On/Off] |
Signal output status of warning systems ON indicator |
| LDP ON IND |
[On/Off] |
Request signal status of LDP ON indicator lamp |
| LANE DPRT W/L |
[On/Off] |
Request signal status of lane departure warning lamp |
| BUZZER OUTPUT |
[On/Off] |
Signal output status of lane departure warning buzzer |
| LC INACCURAT |
[On/Off] |
Lane camera unit status |
| CAM HIGH TEMP |
[On/Off] |
Status of lane camera unit high temperature judgment |
| VHCL SPD SE |
[km/h] or [mph] |
Vehicle speed received from ABS actuator and electric unit (control unit) via CAN communication |
| TURN SIGNAL |
[Off/LH/RH] |
Status of "Turn signal" determined from BCM via CAN communication |
| LANE DETCT LH |
[On/Off] |
Left side lane marker detection |
| LANE DETCT RH |
[On/Off] |
Right side lane marker detection |
| CROSS LANE LH |
[On/Off] |
Condition that the vehicle is crossing left lane marker |
| CROSS LANE RH |
[On/Off] |
Condition that the vehicle is crossing right lane marker |
| WARN LANE LH |
[On/Off] |
Warning for left lane marker |
| WARN LANE RH |
[On/Off] |
Warning for right lane marker |
| VALID POS LH |
[VLD/INVLD] |
Lateral position for left lane marker is valid |
| VALID POS RH |
[VLD/INVLD] |
Lateral position for right lane marker is valid |
| AIMING DONE |
[OK/NG] |
Status that camera aiming is done |
| AIMING RESULT |
[OK/NOK] |
Result of camera aiming |
| XOFFSET |
[pixel] |
Lane camera unit installation condition |
| CHK AIM YAW |
[deg] |
Check result of camera aiming |
| CHK AIM ROLL |
[deg] |
Check result of camera aiming |
| CHK AIM PITCH |
[deg] |
Check result of camera aiming |
| FCTRY AIM YAW |
[deg] |
Lane camera unit installation condition |
| FCTRY AIM ROL |
[deg] |
Lane camera unit installation condition |
| FCTRY AIM PIT |
[deg] |
Lane camera unit installation condition |